Bordo Column Radiators - 592mm high

Similar in appearance to the Classic, but the sectional nature of its manufacture and the limited range of sizes means it can be offered at surprisingly affordable prices. Popular for use throughout the entire house. The white Bordo has become one of our most popular ranges since launch with developers, architects and homeowners alike. For coloured options, see our Colori, Classic or Core ranges.

  • All sizes in 1 week
  • Classic design
  • Made in Italy
Starting From Incl. VAT £103.20 £86.00
In stock
SKU bordo_trad_592

Lead Time:-

Approximately 1 week

There is no Price List.


  • Lead time: This radiator is assembled to order (non-stock): approximately 1 week.
  • Finishes: This radiator is finished in Warm White RAL 9010. If you are looking for radiators in this style that are in a colour other than white, see the Colori, Core or Classic radiators or ask for more information.
  • Mounting: Floor-standing radiators come with insertable feet and wall stays (the heights of the floor-mounted models above include the height of the feet at 120mm). Wall-mounted radiators just come with wall brackets – allow additional height for skirting board / air circulation.
  • Other sizes: Wider sizes than listed are available. These come in 2 blocks for joining on site. A joining tool is required for assembly on site (for £120 deposit). Please call for further information. For other heights and depths, please see our Core and Classic ranges or call for more information.
  • Material: Made of mild steel.
  • Delivery: We offer delivery to most addresses on the UK mainland (excluding some remote areas) [MORE INFORMATION]
  • Fixings: Radiators are supplied with the necessary fixings i.e. wall bracket, plugs, bushes and vents. 1/2″ connections are supplied as standard. Screws are not supplied.
  • Depth (excluding brackets):
    • 66mm (2 column)
    • 107mm (3 column)
    • 148mm (4 column)
    • 230mm (6 column)
  • Projection from the wall: Depth plus 35mm
  • Valve connections: Side valve connections so add 150mm in total to the width of the radiator to allow for valves. (These are not pipe centre measurements.)
  • Valves and finishing touches: These not included as there is now so much choice available. See our Valves page for valves and accessories to complete the look.
  • Pipe centre measurements: Approximate pipe centres can be provided if you wish to install your pipework in advance of receiving your radiator.
  • Manufacturer’s guarantee: 5 year manufacturer’s guarantee against manufacturing defects.
  • Heat outputs: These are shown at operating temperatures of 90/70/20 (Dt60˚C). To obtain Dt50˚C outputs, multiply the outputs shown by 0.789.
  • Water treatment: The manufacturer’s guarantee will only be valid if your radiators are installed in accordance with British Standards. This means that, on completion of installation, the system should be properly flushed and filled to remove debris and minimise the presence of solid particles and chemical residues, which may cause corrosion and damage within the system. Corrosion inhibitor should be used in accordance with British Standards and should take into account the particular metals within the system.
  • Terms and Conditions: All sales are subject to our standard Ts and Cs; a copy can be downloaded from our website.
  • VAT: The prices shown are inclusive of VAT.