“Copper” look at the stunning Arteplano; bold as brass and demanding attention in any room its placed. This radiator puts its best face forward, as the heating tubes are concealed behind a beautiful metal front plate. Offering a truly original radiator in brass or copper as each model is individually etched so every radiator is unique.
Lead time: Etched copper vertical models: usually in stock in the UK / All other etched copper models and all etched brass (non-stock) are by special order: please allow around 6 to 8 weeks. Special order means that an order cannot be cancelled once manufacturing has commenced.
Finishes: Choose from etched brass or etched copper front plates. These front plates are individually etched by hand making each radiator entirely unique and different in tone and pattern. This radiator is also available with the front plate in white, brushed aluminium or in other colours and with towel rails by special order. Please ask for details.
Material: Made of steel ribs with a copper or brass front plate.
Delivery: We offer delivery to most addresses on the UK mainland (excluding some remote areas) [MORE INFORMATION].
Fixings: Radiators are supplied with the necessary fixings i.e. wall bracket, plugs, bushes and vents. ½”connections are supplied as standard. Screws are not supplied.
Projection from the wall: 74mm or 79mm (excluding towel rail)
Valve connections: Vertical models: underside valve connections. / Horizontal models: side valve connections so please add 150mm in total to the width of the radiator to allow for valves (these are not pipe centres).
Valves and finishing touches: These not included as there is now so much choice available. See our Valves page for valves and accessories to complete the look.
Pipe centre measurements: Approximate pipe centres can be provided if you wish to install your pipework in advance of receiving your radiator.
Manufacturer’s guarantee: 5 year manufacturer’s guarantee against manufacturing defects.
Heat outputs: These are shown at operating temperatures of 90/70/20 (Dt60°c). To obtain Dt50°c outputs, multiply the outputs shown by 0.789.
Water treatment: The manufacturer’s guarantee will only be valid if your radiators are installed in accordance with British Standards. This means that, on completion of installation, the system should be properly flushed and filled to remove debris and minimise the presence of solid particles and chemical residues, which may cause corrosion and damage within the system. Corrosion inhibitor should be used in accordance with British Standards and should take into account the particular metals within the system.
Terms and Conditions: All sales are subject to our standard Ts and Cs; a copy can be downloaded from our website.