The Brunswick has the right angle when it comes to warm towels and timeless clean cut style. Made of stainless steel, the square tubed practical design of the Brunswick is a welcome addition to any bathroom. Brunswick squares up to the competition:
Available in central heating, all electric and “dual fuel” (central heating with a summer heating element) versions;
Simple classic designs that complements both traditional and contemporary interiors;
Can be delivered on the next working day if ordered before 12 noon;
Comes with a 25 year manufacturer’s guarantee;
Can be used on any heating system including open and secondary return hot water systems;
The stainless steel used to make this radiator is made of 90% recycled metal; and
The stainless steel used to make it is 100% recyclable.
Pipes from wall = we recommend “corner” valves, which are specifically designed for use where pipes are coming from the wall; these valves offer a much neater finish than standard angled valves.
Pipes from floor = we recommend straight valves.
Dual fuel versions (with summer heating elements)
You can upgrade the central heating version of this radiator, by adding an electric summer heating element; this will provide you with warm towels when the central heating is turned off. There are 2 choices of electric elements: Basic on/off control with thermal cutout or adjustable thermostatic control
Pipes from wall = we recommend “dual fuel” valves, which are specifically designed for use on dual fuel versions where pipes are coming from the wall; these valves offer a much neater finish than standard angled valves.
Pipes from floor = we recommend a “mixed” set of valves, 1 straight and 1 angled.
All “dual fuel” electric elements are fitted as standard in the right hand side of the towel rail (please confirm at time of order if you want the element on the left). Electric elements can be connected to a fused spur or a 3 pin plug (please allow extra height when element is added)
All Electric versions
These radiators are also available in electric only versions, for use where there is no central heating. There are 2 choices of electric elements: Basic on/off control with thermal cutout or adjustable thermostatic control.
All electric elements are fitted as standard in the right hand side of the towel rail and are capped on the left hand side with a chrome plated cap (please confirm at time of order if you want the element on the left). Electric elements can be connected to a fused spur or a 3 pin plug (please allow extra height when element is added).
Lead time: All Brunswicks are usually in stock in the UK: next working day delivery if ordered before 11am.
Finishes: Polished stainless steel has an appearance similar to chrome. Satin stainless steel is brushed and has a matt finish.
Material: Made of stainless steel.
Delivery: We offer delivery to most addresses on the UK mainland (excluding some remote areas) [MORE INFORMATION].
Fixings: Radiators are supplied with the necessary fixings i.e. wall bracket, plugs, bushes and vents. ½”connections are supplied as standard. Screws are not supplied.
Projection from wall to front face: 70mm to 95mm.
Valve connections: Underside bottom opposite end valve connections
Valves and finishing touches: These not included as there is now so much choice available. See advice above then our Valves page for valves and accessories to complete the look.
Pipe centre measurements: Approximate pipe centres can be provided if you wish to install your pipework in advance of receiving your radiator.
Manufacturer’s guarantee: 25 year manufacturer’s guarantee against manufacturing defects.
Heat outputs: These are shown at operating temperatures of 90/70/20 (Dt60°c). To obtain Dt50°c outputs, multiply the outputs shown by 0.789.
Water treatment: The manufacturer’s guarantee will only be valid if your radiators are installed in accordance with British Standards. This means that, on completion of installation, the system should be properly flushed and filled to remove debris and minimise the presence of solid particles and chemical residues, which may cause corrosion and damage within the system. Corrosion inhibitor should be used in accordance with British Standards and should take into account the particular metals within the system.
Terms and Conditions: All sales are subject to our standard Ts and Cs; a copy can be downloaded from our website.