This stunning bare metal radiator goes right to the core of industrial chic design. Bringing effortless cool and stylish warmth, Core looks equally at home in contemporary as well as traditional interiors. Keenly priced and with its’ impressive performance, this beauty will warm you to the core.
The “lacquered bare steel” finish of the Core radiator means a transparent coating is applied to the bare mild steel of the radiator. This means that the manufacturing marks that occur during production of the radiator such as welds with be visible and are there purposely to add to the industrial appeal of this radiator.
Lead time: This particular size is only available by special order – approximately 6 weeks. However, we do have other sizes held in stock or approximate pipe centres can be provided if you wish to install your pipework in advance of receiving your radiator.
Finish: Lacquered bare steel is a transparent coating that is applied to the bare mild steel finish. It will expose the manufacturing marks that occur in production of the radiator such as welds and rivets – see close-up image.
Material: Made of mild steel.
Delivery: We offer delivery to most addresses on the UK mainland (excluding some remote areas) [MORE INFORMATION]
Fixings: Radiators are supplied with the necessary fixings i.e. wall bracket, plugs, bushes and vents. ½”connections are supplied as standard. Screws are not supplied.
Depth: 101mm (excluding brackets)
Projection from the wall: 125mm
Valve connections: Side valve connections so add 150mm in total to the width of the radiator to allow for valves. (These are not pipe centre measurements.)
Valves and finishing touches: These not included as there is now so much choice available. See our Valves page for valves and accessories to complete the look.
Pipe centre measurements: Approximate pipe centres can be provided if you wish to install your pipework in advance of receiving your radiator.
Manufacturer’s guarantee: 5 year manufacturer’s guarantee against manufacturing defects.
Heat outputs: These are shown at operating temperatures of 90/70/20 (Dt60°c). To obtain Dt50°c outputs, multiply the outputs shown by 0.789.
Water treatment: The manufacturer’s guarantee will only be valid if your radiators are installed in accordance with British Standards. This means that, on completion of installation, the system should be properly flushed and filled to remove debris and minimise the presence of solid particles and chemical residues, which may cause corrosion and damage within the system. Corrosion inhibitor should be used in accordance with British Standards and should take into account the particular metals within the system.
Terms and Conditions: All sales are subject to our standard Ts and Cs; a copy can be downloaded from our website.