This stunning bare metal radiator goes right to the core of industrial chic design. Bringing effortless cool and stylish warmth, Electric Core looks equally at home in contemporary as well as traditional interiors. Keenly priced and with its’ impressive performance, this beauty will warm you to the core.
The “lacquered bare steel” finish of the Electric Core radiator means a transparent coating is applied to the bare mild steel of the radiator. This means that the manufacturing marks that occur during production of the radiator such as welds with be visible and are there purposely to add to the industrial appeal of this radiator.
The electric element has 1m of white flex and is for DIY installation on site – full instructions provided.
Adjustable (operating range 20-70°C) element with frost protection setting, 240V on/off operation.
Supplied with an anthracite element control box. (The colour of the element does not match the radiator exactly but is the closest colour available).
Please allow an extra 60mm width for the element control box.
Lead time: All Electric Core radiators are by special order: approximately 6 weeks. Special order means once manufacturing has commenced, the order cannot be cancelled.
Finish: Lacquered bare steel is a transparent coating that is applied to the bare mild steel finish. It will expose the manufacturing marks that occur in production of the radiator such as welds and rivets – see close-up image.
Electric element: This radiator is a central heating radiator that is supplied with a DIY electrification kit – full installation instructions are provided.
The element has a dial on it to enable you to adjust the temperature (operating range 20-70°C) or set it to “frost protection” when not in use.
It does not have a timer as standard.
It can be upgraded to add extra functions and controls, via in-house controllers or via an app on your device(s); the aim being to minimize energy wastage and maximise efficiency – contact our sales team for more information.
Please allow an extra 60mm width to allow space for the element control box.
The element control box is anthracite grey as standard. The colour of the elements do not match the radiator exactly but is the closest colour available.
The electric element has 1m of white flex as standard.
240V on/off operation.
Material: Made of mild steel.
Delivery: We offer delivery to most addresses on the UK mainland (excluding some remote areas) [MORE INFORMATION]
Fixings: Radiators are supplied with the necessary fixings i.e. wall bracket, plugs, bushes and vents. ½”connections are supplied as standard. Screws are not supplied.
Projection from the wall: 125mm (3 columns), 163mm (4 columns) and 239mm (6 columns)
Valve connections: Side valve connections so add 150mm in total to the width of the radiator to allow for valves. (These are not pipe centre measurements.)
Valves and finishing touches: These not included as there is now so much choice available. See our Valves page for valves and accessories to complete the look.
Pipe centre measurements: Approximate pipe centres can be provided if you wish to install your pipework in advance of receiving your radiator.
Manufacturer’s guarantee: 5 year manufacturer’s guarantee against manufacturing defects.
Heat outputs: These are shown at operating temperatures of 90/70/20 (Dt60°c). To obtain Dt50°c outputs, multiply the outputs shown by 0.789.
Water treatment: The manufacturer’s guarantee will only be valid if your radiators are installed in accordance with British Standards. This means that, on completion of installation, the system should be properly flushed and filled to remove debris and minimise the presence of solid particles and chemical residues, which may cause corrosion and damage within the system. Corrosion inhibitor should be used in accordance with British Standards and should take into account the particular metals within the system.
Terms and Conditions: All sales are subject to our standard Ts and Cs; a copy can be downloaded from our website.