Made of stainless steel, the flat vertical bars (which are polished on one side and brushed on the other) are twisted through an entire 360 or 720 degrees from top to bottom. An awesome design statement with powerful performance, the Twister is forecast to blow you away.
Lead time: All sizes are usually in stock in the UK – approximately 3 to 4 working days.
Finishes: Bars are brushed on one side and polished on the other. Brushed stainless steel has a matt finish similar to the most popular finish of cooker hoods for example. Polished stainless steel has an appearance similar to chrome.
Design: “360” = radiators with a 360 degree twist. / “720” = radiators with a 720 degree twist.
Material: Made of stainless steel.
Delivery: We offer delivery to most addresses on the UK mainland (excluding some remote areas) [MORE INFORMATION].
Fixings: Radiators are supplied with the necessary fixings i.e. wall bracket, plugs, bushes and vents. ½”connections are supplied as standard. Screws are not supplied.
Valve connections: 5 bar models have underside valve connections / 7 and 9 bar models have both side and underside connections. (If using side connections, add an extra 150mm to the width of the radiator to allow for valves. These are not pipe centres.)
Valves and finishing touches: These not included as there is now so much choice available. See our Valves page for valves and accessories to complete the look.
Pipe centre measurements: Approximate pipe centres can be provided if you wish to install your pipework in advance of receiving your radiator.
Manufacturer’s guarantee: 20 year manufacturer’s guarantee against manufacturing defects.
Heat outputs: These are shown at operating temperatures of 90/70/20 (Dt60°c). To obtain Dt50°c outputs, multiply the outputs shown by 0.789.
Water treatment: The manufacturer’s guarantee will only be valid if your radiators are installed in accordance with British Standards. This means that, on completion of installation, the system should be properly flushed and filled to remove debris and minimise the presence of solid particles and chemical residues, which may cause corrosion and damage within the system. Corrosion inhibitor should be used in accordance with British Standards and should take into account the particular metals within the system.
Terms and Conditions: All sales are subject to our standard Ts and Cs; a copy can be downloaded from our website.