CALL US: 01274 567789
Rococo Cast Iron Radiators - 810mm high
Cast from an original found in a Parisian Bordello. This gorgeous cast iron radiator with floral Rococo motif and scrolled top oozes glamour and the decadence of a bygone era, bringing real oomph and lashings of warmth to the party. The burnished finish further emphasises the stunning decorative detail. Hand-built using traditional methods.
- Unique, ornate casting
- Slimline design
- Burnished gold, iron or copper
Lead Time: Approximately 6 weeks
|Size||Heat Output (Watts/BTUs)||Price incl VAT|
|3 Sections/265mm wide||633/2160||£393.60|
|4 Sections/330mm wide||844/2880||£498.00|
|5 sections/400mm wide||1055/3600||£602.40|
|6 sections/470mm wide||1266/4320||£708.00|
|7 sections/540mm wide||1477/5040||£812.40|
|8 sections/610mm wide||1688/5760||£916.80|
|9 sections/680mm wide||1899/6480||£1,021.20|
|10 Sections/750mm wide||2110/7200||£1,126.80|
|11 sections/830mm wide||2321/7920||£1,231.20|
|12 sections/900mm wide||2532/8640||£1,335.60|
|13 sections/970mm wide||2743/9360||£1,441.20|
|14 sections/1040mm wide||2954/10080||£1,545.60|
|15 sections/1110mm wide||3165/10800||£1,650.00|
- Cancellations: Cast iron radiators are made to order. Once manufacture has commenced, orders cannot be cancelled.
- Lead time: approximately 6 weeks.
- Delivery: We offer delivery to most addresses on the UK mainland (excluding some remote areas) via a commercial pallet carrier service [MORE INFORMATION]
- Fixings: Radiators are supplied with the necessary fixings i.e. feet, wall bracket, plugs, bushes and vents. Cast iron radiators are floor-standing (with feet) as standard - wall mounted versions (without feet) are available on request. ½”connections are supplied as standard. (¾” connections are available on request.) Screws are not supplied.
- Depth: Radiator depth at deepest part (excluding wall bracket) = 108mm
- Projection from the wall: minimum is depth of radiator plus skirting board depth.
- Valves and finishing touches: These not included as there is now so much choice available. See our Valves page for valves and accessories to complete the look.
- Heat outputs: These are shown at operating temperatures of ∆t60˚C (British standard). To obtain ∆t50˚C outputs (European standard), multiply the outputs shown by 0.789.
- Pipe centre measurements: Cast iron radiators have tapping centres that equal the width of the radiator, so pipe centre measurements equal the width of the radiator plus and appropriate amount for valves. Bear in mind, some cast iron radiators are hand-finished in the traditional manner so widths of radiators may vary between batches. For this reason, we don’t advise finalising any pipework until the radiators are on site.
- Manufacturer’s guarantee: 10 year manufacturer’s guarantee against manufacturing defects.
- Water pressure: maximum working pressure of 6 bar.
- Water treatment: The manufacturer’s guarantee will only be valid if your radiators are installed in accordance with British Standards. This means that, on completion of installation, the system should be properly flushed and filled to remove debris and minimise the presence of solid particles and chemical residues, which may cause corrosion and damage within the system. Corrosion inhibitor should be used in accordance with British Standards and should take into account the particular metals within the system.
- Terms and Conditions: All sales are subject to our standard Ts and Cs; a copy can be downloaded from our website.
All our cast iron radiators are available in a wide range of finishes, including traditional metallic paints and colour matches to popular paint ranges such as Farrow & Ball. Our images show a selection of the finishes available but please be aware that the images shown are for illustrative purposes and colours may not be accurately reproduced on a computer screen. Therefore more accurate colour cards and swatches can be sent by post to help you ensure you can make an informed choice - please contact our team to request samples.
Primer: A base coat ready for on-site painting or for delivery direct to your chosen painting company in the UK. Please be aware that we advise against leaving the radiators in a just a primer finish; a top coat is required to ensure protection against airborne moisture. We also strongly advise against powder-coating cast iron radiators as this process can weaken the seals between sections, therefore powder-coating will invalidate any manufacturer’s guarantee.
- Burnished finishes – hand-finishing method that highlights the decorative detail in the casting. Only available on the Rococo. Bear in mind that, as this finish is done by hand, variation will occur;
- Traditional matt metallics available on request – see options list and colour card; or
- Bespoke colour match available on request - we can colour match to any other non-textured paint range (including RAL, Farrow and Ball, Aga, Rayburn, Little Greene Paint Co, Fired Earth, Paint Library and Dulux colours). There may be a surcharge for some colours - please contact our team to discuss further.
- Shade variations may occur from one paint batch to the next and, over the years, our traditional metallic paints have changed slightly as these are hand-made. Accordingly, where radiators are to be used in the same room and/or a colour match is important, it is advisable to order all radiators at the same time. If you are looking to colour match to radiators ordered previously, please make us aware of this at time of order so we can minimise shade variation.
- Cast iron radiators by nature have a textured finish. For a smooth finish, please see our steel column models such as the Classic, Colori and Bordo ranges. Light coloured paint finishes such as silver, white and cream will highlight the imperfections characteristic of cast iron more than the darker colours.